This is the new design touch screen model of bonding machine. Designed to use all your old AT750 conversion parts whilst having the advantage of a new quick change location system and flat-bed working area. Patented design features with two continuous heated silicon belts and both top and bottom hot air.
This versatile machine can be fitted with lots of different fittings for many different operations.
It is primarily used to turn over and bond down a hem or lap seam as a 2nd operation machine. Because it has the patented silicon belt heating system, it allows you to produce garments without the need for manual pressing after.
The machine is available with a manual or an electronic metering device, which is integrally linked with the machine electronics, so that it can be used for applying elastic or tapes with differential setting adjustable around the garment.
AT900 series bonding machine
Standard Models available
AT900V - Bonding machine with heated belts in 7, 12, 20 and 30mm width
AT900KV - side knife lay down Bonding machine with 20mm wide bottom heated belts and top drop roller belt foot in either 7mm 12mm and 20mm
All machines available with and electronic metering for tensioning and applying adhesive, decorative tapes, coated fabrics and coated elastics, with drag or slack fed.
All the machines can be converted to each other, making your investment safe and future proofed.
Other models listed below
This machine applies heat with Heated Belts, hot air and can be converted to use all the above methods of application.
independently driven heated belts,
Drop roller foot with heated belts,
silicon drive rollers in any combination
Flat belted feed off the arm
AT900KV - Bonding machine with Side knife for laying down adhesive, decorative tapes, coated fabrics and coated elastics onto the garment edge, while trimming the fabric level with the adhesive edge. It uses heated belts in 7mm, 12mm, 20mm and 30mm width and is available with electronic metering.
AT900KF - Bonding machine with Side knife for laying down adhesive, decorative tapes, coated fabrics and coated elastics onto the garment edge, while trimming the fabric level with the adhesive edge. It uses long flat heated belts in 20mm and 30mm width to fully bond the edge so no final pressing operation is needed
AT900R - Roller Bonding Machine
This machine is designed for bra cup hemming over and can be fitted with a heated 7mm or 12mm heated belt drop roller foot and a soft silicon bottom roller so it doesn't damage the soft foam cup, whilst using hot air to pre warm the fabric and activate the adhesive in the hem
AT900FOA - Bonding machine This newly designed versatile touch screen bonding machine has adaptable bed fittings that can be removed to simply fit a quick release Feed off the arm unit fitted, allowing you to still have the same heated belt system and allow free passage of closed side seams, garment arms and legs through the machine.
With this having heated belts it isvery versatile and allows you to both hem and seam cover on the one machine.
AT900RRBM - Bonding machine with Side mounted metering system and heated binding guide, for bonded edge binding using coated elastics and fabrics..
This machine has a roller drive system for ease of cornering, but can also be set up on a heated belt setup.